LV switch SIP-T800 User Manual Download Page 46

Page: 46 / 111

SIP-T800 IP Phone User Manual

number, account etc. ).

3. Press the

Save

soft key to save changes to the blacklist members.

- Add a blacklist through the phone CDR interface

1. Press the

History

soft key in standby mode.

2. Press

to select the number added to the blacklist.

3. Press soft key

Option->Add to blacklist.

4. Complete blacklist member information.
5. Press

to save the blacklist.

- Add blacklist via web browser

1. Log in to the phone page by IP address.
2. Click

Directories(B)->Address list(x).

3. Fill in the name and phone number to be added to the blacklist in the local contact

module, and select the group as a Blacklist (BlackList).

4. Click the

Add

button to save the blacklisted contacts.

Summary of Contents for SIP-T800
















































































































Search results

Summary of Contents for SIP-T800

Reviews:

Related manuals for SIP-T800

Brands by name

Popular brands

LV switch SIP-T800, User Manual

Search results

Summary of Contents for SIP-T800

Reviews:

Related manuals for SIP-T800

Brands by name

Popular brands