95
5. (Optional) Enter a label in the label area. When a multicast RTP stream is
received, the LCD interface will display the multicast label.
6. Select the corresponding channel in the channel drop-down box, the default
is 0.
7. Click
Confirm
and save the operation.
6.3.4 Multicast use
Phone A has set up account 1 as multicast, account 2 as the multicast list, phone B, C,
D, etc., set the listening address;
1.
Multicast key sending
: When phone A is in standby mode, press the
account 1 multicast key, and the pre-configured monitor phone will receive the
multicast RTP stream; if phone A presses the hold key, the receiver will
automatically hang up the multicast RTP session. Press the restore button to
restore the held multicast. Press Hang up to end the multicast RTP session.
2.
Multicast list sending
: Press Multicast List in the standby state, select the
option that needs multicast and press Multicast, or press Menu->Function-
>Multicast List in the standby state.
Precautions:
1. The multicast RTP stream is one-way, only from the sender to the receiver.
When the phone is in a call, initiate a multicast RTP session and the current call is
on hold;
2. Multicast will not generate call records.
6.4 Message
