LV switch SIP-T800 User Manual Download Page 43

Page: 43 / 111

After clicking Import, the following prompt will appear:

4.3.1.5 Edit contact

- Edit contacts via phone interface

1. Press the

Dir

soft key in standby mode (or

Menu -> Directory -> Local Directory)

-> All Contacts

2. Press

to select the person name needed to be edit.

3. Press soft key option-> details,enter into the edit page of the contact.
4. Press

to edit the contact information.

5. Press OK to save the editing operation

- Edit contacts via web browser

1. Log in to the phone page by IP address.
2. Click

Directories(B)->Address list(x).

3. Click the contact you want to edit in the contact list below, and the information will

be filled in the local contact module.

4. Modify the contact information in the local contact module.
5. Click the

Edit

button to save the editing operation.

Summary of Contents for SIP-T800
















































































































Search results

Summary of Contents for SIP-T800

Reviews:

Related manuals for SIP-T800

Brands by name

Popular brands

LV switch SIP-T800, User Manual

Search results

Summary of Contents for SIP-T800

Reviews:

Related manuals for SIP-T800

Brands by name

Popular brands