Luxul XBR-2300 User Manual Download

Page: 7 / 52

User Guide

Other trademarks and registered trademarks are the property of their respective owners

4 HARDWARE FEATURES AND INSTALLATION

4.1 Front View

XBR-2300 Front View

Factory Reset Button:

Used to restore factory default settings.

To reset to factory defaults

, press and hold the reset button until the SYS LED

turns off, approx. 10 seconds. A factory reset may take approximately a minute to
complete. A successful Factory Reset is indicated by all of the Port LEDs fl ashing
once. When the SYS LED Begins to fl ash the unit is ready.

NOTE:

To hard reset the router use the power switch. Turn the router
off, wait 10 seconds and turn the unit back on.

CAUTION:

Resetting the XBR-2300 to factory defaults will remove all

custom settings..

Status Indicators:

The following table describes the LED functionality:

Indicator

Description

Power

The power is on

Off

No power, check power connections

System

Flashing

Indicates the XBR-2300 is functioning correctly.

Indicates the XBR-2300 is booting.

Off

Indicates the system is not functioning correctly.

WAN/LAN

Indicates the WAN/LAN port is connected correctly.

Flashing

Indicates data packets are being transferred

100Mbps

Indicates the corresponding port is in 100Mbps working mode.

Off

Indicates the corresponding port is in 10Mbps working mode

Summary of Contents for XBR-2300





















































Search results

Summary of Contents for XBR-2300

Reviews:

Related manuals for XBR-2300

Brands by name

Popular brands

Luxul XBR-2300, User Manual

Search results

Summary of Contents for XBR-2300

Reviews:

Related manuals for XBR-2300

Brands by name

Popular brands