15
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
NOTE:
If the default IP Address has been changed, the new IP Address must
be entered into the management interface. The default Gateway
value of all devices connected to the LAN must be set to the new IP
Address in order to have Internet access.
NOTE:
If your client device is set to use DHCP, the address must be
re-requested. This can be done by simply unplugging and
re-plugging the Ethernet cable.
5.3.2 WAN Settings
This interface displays the status of the WAN connections, as well as the port parameters.
To change the WAN interface settings, select “Edit” next to the WAN interface you
would like to change. This opens up the interface shown below.
Each WAN interface supports three connection modes: Static IP, Dynamic IP and
PPPoE dial-up.
