Luxul XBR-2300 User Manual Download

Page: 48 / 52

XBR-2300

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XBR-2300 Vers: 07314

5.9.2 Backup/Restore

This section allows you to Backup and Restore the XBR-2300 configuration.

Backup:

Click “Backup” to be given a Save Configuration dialog box

Restore:

Click “Browse” to select a saved Configuration file on your device

5.9.3 Firmware Upgrade

This section allows for the upgrade of the XBR-2300 Firmware. It is recommended to
check regularly for any Firmware updates.

Firmware upgrading steps

Browse:

To select the path of the Firmware File

Upgrade:

Performs the upgrade with the selected Firmware File

Router automatically reboots after being upgraded

WARNING!:

Do not shut down power to the XBR-2300 during the upgrade
process or the router will be damaged. The XBR-2300 will
automatically restart after a successful upgrade. The upgrade
process may take several minutes to finish.

5.9.4 Restore Defaults

This option can be used to restore the XBR-2300 to Factory Default Settings. This is
useful if there are any configuration errors.

Default Password:

admin

Default IP Address:

192.168.0.1

Default Subnet Mask:

255.255.255.0

NOTE:

Restore Factory Default only takes effect after the router reboots

5.9.5 Reboot

Forces a Reboot of the XBR-2300. This option is used when a configuration change
requires a Reboot in order to take effect.

Summary of Contents for XBR-2300





















































Search results

Summary of Contents for XBR-2300

Reviews:

Related manuals for XBR-2300

Brands by name

Popular brands

Luxul XBR-2300, User Manual

Search results

Summary of Contents for XBR-2300

Reviews:

Related manuals for XBR-2300

Brands by name

Popular brands