Luxul XBR-2300 User Manual Download

Page: 12 / 52

XBR-2300

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XBR-2300 Vers: 07314

WAN IP:

IP address obtained from ISP (Dynamic only) or the Static address

assigned by the ISP

Subnet Mask:

The subnet mask obtained from ISP (Dynamic only) or the Static

Subnet Mask assigned by the ISP

Gateway:

The gateway obtained from ISP (Dynamic only) or the Static Gateway

assigned by the ISP

DNS:

The DNS server obtained from ISP (Dynamic only) or the Static DNS server

assigned by the ISP

Alternate DNS:

Alternate DNS server obtained from ISP (Dynamic only) or the

Static Alternate DNS server assigned by the ISP

WAN MAC Address:

Displays the WAN MAC Address

WAN Port Traffic:

Indicates the current bandwidth being used (units are KB/s)

5.2.2 WAN2

WAN2 Status displays the current WAN2 Connection Status, Connection Mode, WAN
IP, Subnet Mask, Gateway, DNS Server, Alternate DNS Server, WAN MAC Address, WAN

Traffic and Connection Time.

Connection Status:

Displays the WAN connection status

Disconnected: The WAN port has no connection to the Internet

Connecting: The WAN port is obtaining an IP address (Dynamic settings only)

Connected: The XBR-2300 is connected to the Internet

Network cable is not connected: No Cable Connected

Connection Mode:

Displays currently configured access mode

Summary of Contents for XBR-2300





















































Search results

Summary of Contents for XBR-2300

Reviews:

Related manuals for XBR-2300

Brands by name

Popular brands

Luxul XBR-2300, User Manual

Search results

Summary of Contents for XBR-2300

Reviews:

Related manuals for XBR-2300

Brands by name

Popular brands