Luxul XBR-2300 User Manual Download

Page: 13 / 52

User Guide

Other trademarks and registered trademarks are the property of their respective owners

WAN IP:

IP address obtained from ISP (Dynamic only) or the Static address

assigned by the ISP

Subnet Mask:

The subnet mask obtained from ISP (Dynamic only) or the Static

Subnet Mask assigned by the ISP

Gateway:

The gateway obtained from ISP (Dynamic only) or the Static Gateway

assigned by the ISP

DNS:

The DNS server obtained from ISP (Dynamic only) or the Static DNS server

assigned by the ISP

Alternate DNS:

Alternate DNS server obtained from ISP (Dynamic only) or the

Static Alternate DNS server assigned by the ISP

WAN MAC Address:

Displays the WAN MAC Address

WAN Port Traffic:

Indicates the current bandwidth being used (units are KB/s)

5.2.3 LAN

Displays the XBR-2300’s IP Address, Subnet Mask, LAN MAC Address, DHCP Server
status and NAT/NAT Entries.

IP Address:

Displays the IP address assigned to the XBR-2300. This address will be the

Gateway of all other devices on the network.

Subnet Mask:

Displays the subnet mask assigned to the XBR-2300

LAN MAC Address:

Displays the LAN MAC address assigned to the XBR-2300

DHCP Server:

Displays the status of the DHCP server (Enabled or Disabled)

NAT/NAT Entry:

Displays the status of NAT (Enabled or Disabled) and the current

number of NAT entries in use.

5.2.4 System

Displays the status of the XBR-2300s’ CPU Usage, Memory Usage, Uptime, System
time, number of Connected Clients, Firmware Version, Bootcore Version and
Hardware Version.

Summary of Contents for XBR-2300





















































Search results

Summary of Contents for XBR-2300

Reviews:

Related manuals for XBR-2300

Brands by name

Popular brands

Luxul XBR-2300, User Manual

Search results

Summary of Contents for XBR-2300

Reviews:

Related manuals for XBR-2300

Brands by name

Popular brands