LuxHome LHC100SK, Instruction Manual

Page: 28 / 43

8
Zone Lockout
This feature, if enabled, prevents a single zone from triggering an alarm condition more than three
times before the system is disarmed. However, if disabled there is no limit on the number of times a
zone can trigger an alarm condition.
Default setting: ON
Press
6 7
The zone 1 LED will illuminate to indicate the current Zone Lockout status.
LED ON Zone Lockout enabled
LED OFF Zone Lockout disabled
Press
,
1 2 3 4
,
to change the setting to the opposite state.
Press
,
1 2 3 4
,
to save the new setting and return to programming mode.
Press
ESC
!
to return to programming mode without saving.
Entry / Exit Warning Tone
Default setting: ON
Press
6 8
The zone 1 LED will illuminate to indicate the current status of the Entry/Exit warning tone.
LED ON Tone enabled
LED OFF Tone disabled
Press
,
1 2 3 4
,
to change the setting to the opposite state.
Press
,
1 2 3 4
,
to save the new setting and return to programming mode.
Press
ESC
!
to return to programming mode without saving.
Jamming Detection
This feature controls the Control Panels RF jamming detection circuitry, which if enabled, will
continuously scan for radio jamming signals on the system operating frequency.
Default setting: OFF
Press
:
!
The zone 1 LED will illuminate to indicate the current Jamming Detector status.