LuxHome LHC100SK, Instruction Manual

Page: 25 / 43

5
Programming Instructions
Press
,
? ? ? ?
,
User Access Code
The Arm and Part-Arm LEDs will illuminate and all Zone, Fire and tamper LEDs will flash.
The system is now in Programme Mode
Note: After programming all required functions press
ESC
!
to leave Programme mode and return
to Standby.
User Access Code
Default setting: 1 3 4
Press
,
1 2 3 4
,
Zone LEDs 1-4 will illuminate.
Enter a new 4 digit User Access code. As each digit is entered an illuminated zone LED will be
turned OFF.
Press
,
1 2 3 4
,
to save the new User Access code and return to programming mode.
Press
ESC
!
to return to programming mode without saving.
System House Code
Press
,
1 2 3 4
,
The Zone LED’s 1-6, Fire and Tamper LEDs will illuminate to display the current House Code setting
with an illuminated LED indicating a setting of “on” in the House Code.
For example: A house code of 11110010, will be indicated with zone LEDs 1-4 ON and 5-6 OFF, Fire
LED ON and Tamper LED OFF.
a) At the Control Panel:
By pressing buttons 1-8 on the Control Panel, setting the status LEDs so that they indicate the
required house code setting. The LED will switch to the opposite state each time the button is
pressed.
LED ON = (House Code DIP Switch On)
LED OFF = (House Code DIP Switch Off)
Press
,
1 2 3 4
,
to save the new setting and return to programming mode.
Press
ESC
!
to return to programming mode without saving.