2 |
P a g e
SAFETY & WARNING ADVICE
A minimum of 2 people is necessary for proper installation.
Installation fixings will NOT be supplied with any of the Evo Awning series.
Please refer to fixing section. Each installation should be assessed on a case by case
scenario.
WARNING!
–
The brackets must be fixed solidly to a substantial surface. Hollow bricks or
foam products are not suitable. Brick veneer surfaces require at least 2 courses of
brickwork above the bracket and 2 courses below.
General Advice: The electrical data is shown on the label of electric operating
awnings.
TOOLS REQUIRED
The following tools are required for installation:
•
Level
•
Battery Drill
•
Screwdrivers
•
Hammer Drill
•
Drill Bits
•
Rubber Mallet
MAGNET CARE & HANDLING
•
The magnetic field affects pacemakers, so they need to be kept outside this range
•
Do not cut the magnets. They will blunt the cutting blade or shatter causing serious
injury
•
Do not powder coat the magnets. The baking temperatures in the process remove
the magnetic field
•
Temperatures over 130˚c
remove the magnetic field
•
The magnets have high forces which will cause pinch points
•
The magnets are brittle and will chip/break easily. For instance, if dropped from a
workbench or released to attract together from about 75mm apart
•
If the chrome plating on the surface is chipped or removed severe corrosion will
occur
Summary of Contents for EVO MagnaTrack
Page 1: ...EVO MagnaTrack Installation Manual ...
Page 12: ...12 P a g e FACE FIT APPLICATION ...
Page 19: ...19 P a g e REVEAL FIT INSTALLATION ...
Page 22: ...22 P a g e STEP 2 Install Evo MagnaTrack Channels STEP 3 Repeat steps 1 and 2 for other side ...