LuxaFlex EVO MagnaTrack, Installation Manual

Page: 31 / 33

31 | P a g e
SECTION 4.0: DONUT ADJUSTMENT & PROBE
SECURING
STEP 1
102mm Tube donut adjustment
• Set blind limits.
• Lower and raise the blind through full limits.
• Raise the blind to the top limit.
• If bottom rail has a smile, lower the blind to maximum drop and move both
donuts towards the tube centre. (3 to 5mm at a time).
• The smile can also be reduced by pulling down on the bottom rail on the side(s)
affected when the bottom rail is at the top limit. This allows the fabric/skin to
settle.
• If bottom rail has a frown, lower the blind to maximum drop and move both
donuts away from tube centre. (3 to 5mm at a time).
• If only one side of the bottom rail has a smile/frown, lower the blind to maximum
drop and move the donut on that side only. (3 to 5mm at a time).