LION microPLC
▪
Maintenance – Software
45
Output on the terminal window after a restart:
13.You can follow the update process
with the serial interface. To do so, it
must be set as RS232.
Connect the serial interface to your
PC (null modem cable) and start
any terminal program.
Setting the terminal program:
- Baud rate:
115200
- Data:
8 bit
- Parity:
none
- Stop:
1 bit
- Flow control:
none
If the connection is successful, the bootloader version should be
displayed each time the device is restarted.
The bootloader version shown in the pictures is not the current version.
A maximum of one FTP connection can be established to the microPLC.
If this is not terminated properly, the connection continues to exist.
Only after a restart of the device this connection is closed and the PLC can be
reached again.