Lütze LION microPLC, Operating Instructions Manual, Page: 28 / 58

LION microPLC
▪
Initial Operation – Hardware
28
8.2 Ethernet Interface - X6
The Ethernet interface is for the communication between microPLC and PC, but
also for the communication with other devices. Over this interface the microPLC
can be programmed, visualized, parameterized and debugged in the application
software.
1. Connect the microPLC with the PC
with a suitable cable over the
Ethernet interface
Pin Signal Description
Connector
Housing PE Protective
Earth
1 TXD+ Transmitting
Data
2. Supply the microPLC with voltage
(
see chapter 8.1 Power Supply
).
2 RXD+ Receiving
Data
3 TXD- Transmitting
Data
4 RXD- Receiving
Data
3. The Ethernet connection is active.
The
ETH
ST
LED
blinks green.
Fig. 6: Ethernet Interface M12, X6
,
,
,
,
,
,
,
,
862.
4
4
4
4
6723
(5525
&$1
(7+
$33
,
,
,
,
,
,
,
,
86(55
4
4
4
4
(55
63'
4 4
8 B
581
&$1 B
(7+ B
$33 B
67
67
/
If the LED ETH
SPD
lights up yellow, the ethernet speed is 100 Mbits/s. If the LED
does not shine, the ethernet speed is only 10 Mbits/s.