LION microPLC
▪
Mounting
22
7.4
Locking the Push-In Terminals
7.5
Unlocking the Push-In Terminals
7.6
Wiring – Push-In Terminal
1. Put the terminal in the terminal
connector.
2. Push the terminal down.
The terminal is locked.
Depends on the mounting place of the
module (upside/down).
1. Push the lock and release levers
back or forward.
2. Pull the terminal out of the terminal
connector.
For wiring 5-pin push-in terminals
–
RM5.08 (X1)
–
a 3.5 x 0.6 mm
screwdriver is mandatory.
For wiring 6-pin and 10-pin push-in terminals
–
RM3.5 (X2, X7, X8, X9)
–
a
2.5 x 0.4 mm srewdriver is mandatory.
1. Push the orange slots down with a
slotted screwdriver (3.5 x 0.6 mm for
push-in terminal 5.08 (X1); 2.5 x 0.4
mm for push-in terminal 3.5 (X2, X7,
X8, X9)).
2. While pushing the slots down. put
the wires in the regarding pin holes.
Each pin hole has its own orange
slot.
3. Release the screw driver.