LION microPLC
▪
Mounting
24
7.7.3
Wiring
1. Connect the modules with the sing-
le conductors of the cable.
2. Remove the jacket of the cable,
where the shield clip will be, until
the cable shield can be seen.
3. Fix the cable with the shield clip,
the cable shield must have contact
to the shield clip.
The shield clip can be adjusted in 3
levels, depending on the cable si-
ze.
4. For strain relieve fix the cable with
a wire strap
(2)
to the module as
shown in the drawing.
5. Insulate the cable.
Fig. 5: Wiring EMC Shield Clip Set