background image

Intended use

Prohibited dosing media

7

© Lutz-Jesco GmbH 2018
Subject to technical changes
180321

BA-24721-02-V02

Chlorine gas changeover unit 

C 7523

Operating instructions

3 Intended use

3.1  Notes on product warranty

Any non-designated use of the device can impair its function and the pro-
tection provided. This leads to invalidation of any warranty claims!

Please note that liability is on the side of the user in the following cases:

The device is operated in a manner which is not consistent with these 
operating instructions, particularly safety instructions, handling 
instructions and the section "Intended Use".

Information on usage and environment (see section 5 “Technical 
data” on page 9
) is not adhered to.

If people operate the device who are not adequately qualified to carry 
out their respective activities.

No original spare parts or accessories of Lutz-Jesco GmbH are used.

Unauthorised changes are made to the device.

Maintenance and inspection intervals are not adhered to as required 
or not adhered to at all.

The device is commissioned before it or the corresponding system 
has been correctly and completely installed.

Safety equipment has been bridged, removed or made inoperative in 
any other way.

3.2  Intended purpose

Changeover unit C 7523 is intended exclusively for chlorinators using the 
vacuum process. It serves to switch between two vacuum supply batter-
ies.

3.3  Prohibited dosing media

The device must not be used for the following media and substances:

all media apart from gaseous chlorine

not technically pure chlorine with a mass content of less than 99.5%

Summary of Contents for C 7523

































Reviews: