background image

EU Declaration of Conformity

28

© Lutz-Jesco GmbH 2018

BA-24721-02-V02

Chlorine gas changeover unit 

C 7523

Operating instructions

14  EU Declaration of Conformity

(DE) EU-Konformitätserklärung

Hiermit erklären wir, dass das nachfolgend bezeichnete Gerät aufgrund seiner Konzipierung und Bauart sowie in der von uns in Verkehr gebrachten Ausführung 
den einschlägigen grundlegenden Sicherheits- und Gesundheitsanforderungen der aufgeführten EU-Richtlinien entspricht. Bei einer nicht mit uns abgestimmten 
Änderung am Gerät verliert diese Erklärung ihre Gültigkeit.

(FR) Déclaration de conformité UE

Nous déclarons sous notre propre responsabilité que le produit ci-dessous mentionné répond aux exigences essentielles de sécurité et de santé des directives UE 
énumérées aussi bien sur le plan de sa conception et de son type de construction que du modèle que nous avons mis en circulation. 
Cette déclaration perdra sa validité en cas d’une modification effectuée sur le produit sans notre accord explicite.

(EN) EU Declaration of Conformity

We hereby certify that the device described in the following complies with the relevant fundamental safety and sanitary requirements and the listed EU regulations 
due to the concept and design of the version sold by us. 
If the device is modified without our consent, this declaration loses its validity.

(ES) Declaración de conformidad UE

Por la presente declaramos que, dados la concepción y los aspectos constructivos del modelo puesto por nosotros en circulación, el aparato mencionado a conti-
nuación cumple con los requisitos sanitarios y de seguridad vigentes de las directivas de la U.E. citadas a continuación. 
Esta declaración será invalidad por cambios en el aparato realizados sin nuestro consentimiento.

2006/42/EG
2014/35/EU

Die Schutzziele der Niederspannungsrichtlinie 2014/35/EU wurden gemäß Anhang I, Nr. 1.5.1
der Maschinenrichtlinie 2006/42/EG eingehalten.

The protective aims of the Low Voltage Directive 214/35/EU were adhered to in accordance
with Annex I, No. 1.5.1 of the Machinery Directive 2006/42/EC.

EU-Richtlinien:

EU directives:

Lutz-Jesco GmbH

Dokumentationsbevollmächtigter:

Authorized person for documentation:

Bezeichnung des Gerätes:

Descripción de la mercancía:

Description of the unit:
Désignation du matériel:

Chlorgasumschalter 

Conmutador de cloro

Chlorine gas change over
Commutation du chlore

C 7523 

Typ:

Type:

Heinz Lutz
Geschäftsführer / Chief Executive Officer
Lutz-Jesco GmbH
Wedemark, 01.03.2018

Lutz-Jesco GmbH
Am Bostelberge 19
30900 Wedemark
Germany

DIN EN ISO 12100:2011-03 
DIN EN 61000-6-4:2011-09 
DIN EN 61000-6-2:2016-05 

Harmonisierte Normen:

Harmonized standards:

(PT) Declaração de conformidade UE

Declaramos pelo presente documento que o equipamento a seguir descrito, devido à sua concepção e ao tipo de construção daí resultante, bem como a versão 
por nós lançada no mercado, cumpre as exigências básicas aplicáveis de segurança e de saúde das directivas CE indicadas. 
A presente declaração perde a sua validade em caso de alteração ao equipamento não autorizada por nós.

Designação do aparelho:

Comutador de cloro

Summary of Contents for C 7523

































Reviews: