Luminex GigaCore 30i, User Manual

Page: 29 / 38

4.2 reload defaults
Condition 1: The device is currently running.
Condition 2: The profile stored in slot one needs to be locked through the device settings menu.
Hold the mode button for at least five seconds until the four status LEDs start flashing green. Releasing the
mode button whilst the status LEDs are flashing green will reboot the switch into the profile stored in slot
one.
If you keep the mode button pressed for another 5 seconds, the status LEDs will start flashing red to
provide you with a reset.
Be aware, releasing the mode button before the status LEDs start flashing green, or after the LEDs have
stopped flashing red, will cancel the operation.
4.3 factory reset
Condition 1: The device is switched off.
Hold the mode button while connecting the device to mains power. After approx. 42 seconds, the four
status LEDs will start flashing red. Releasing the mode button whilst the status LEDs are flashing red will
factory reset the device. All customer stored profiles will be erased.
Be aware, releasing the mode button before the status LEDs start flashing red, or after the LEDs have
stopped flashing red, will cancel the operation.
Hold the mode button
Release the button =
Reload default
Release the button =
Reset Function
5s
5s 5s
Timing
Ok
Power RLinkX PoE
Mode
Ok
Power RLinkX PoE
Ok Power RLinkX PoE
Ok
Power RLinkX PoE
Ok
Power RLinkX PoE
Ok
Power RLinkX PoE
Mode
Ok
Power RLinkX PoE
Ok Power RLinkX PoE
Ok
Power RLinkX PoE
Ok
Power RLinkX PoE
42s
5s 5s
Timing
Hold the mode button
whilst powering the unit Release the button =
Factory reset
Release the button =
Cancel Function
Ok
Power RLinkX PoE
Mode
Ok
Power RLinkX PoE
Ok Power RLinkX PoE
Ok
Power RLinkX PoE
Ok
Power RLinkX PoE
4 | reset
29