DELETE A TRUNK
To delete a custom trunk, select the trunk you wish to delete in the Edit trunks window and click the delete
button. All ports that were assigned to the custom trunk are automatically re-assigned to the Management
group.
3.3 port settings
This menu allows you to change the following settings:
RLinkX
: enable/disable RLinkX per port (default is ENABLED).
Legend
: add a legend for easy identification.
Port speed
: set the port speed (default is Auto).
PoE
: enable/disable PoE (if the switch doesn’t support PoE this feature is greyed out).
PoE Priority
: set the PoE priority.
Disable link
: when disabled, the port is displayed greyed out and a red cross is shown in front of the
port on the status page.
Protect
: when enabled, the port settings can not be changed. A padlock icon is displayed on the port at
the top of the page and in front of the port on the status page.
When all settings are as you wish, click
Save
to apply the changes.
AVAILABLE PORT SPEEDS FOR PORT 1-24
Auto: The port automatically detects the speed of the connected device )default).
1Gbps FDX: 1000Mbps Full Duplex.
100Mbps FDX: 100Mbps Full Duplex.
100Mbps HDF: 100Mbps Half Duplex.
10Mbps FDX: 10Mbps Full Duplex.
10Mbps HDX: 10Mbps Half Duplex.
AVAILABLE PORT SPEEDS FOR PORT 25-30
Auto: The port automatically detects the speed of the connected device )default).
10Gbps: 10000Mbps Full Duplex.
1Gbps FDX: 1000Mbps Full Duplex.
100Mbps FDX: 100Mbps Full Duplex.
100Mbps HDF: 100Mbps Half Duplex.
10Mbps FDX: 10Mbps Full Duplex.
10Mbps HDX: 10Mbps Half Duplex.
3 | confIGuratIon
23
