1
2
3
Open the bail wire delatch to disengage
and remove the SFP+ transceiver
Insert the transceiver into the SFP+ cage.
Once properly engaged, the transceiver
can not be removed.
Device shown with dust cap
and bail wire delatch.
Be aware of the insertion direction:
- port 25, 27 and 29 must have the bail wire
delatch on the top.
- port 26, 28 and 30 must have the SFP+
transceiver upside-down.
Bail wire delatch
Bail wire delatch
Bail wire delatch
Bail wire delatch
Dust cap
2.8 Installing sfp+ transceivers
The GigaCore 30i is equipped with six SFP+ cages.
In order to get the best performance, Luminex recommends the use of the following transceivers:
LU 90 01116
Luminex 10GBase-SR SFP+ MMF Transceiver 850nm, 300m, LC, DMI.
LU 90 01117
Luminex 10GBase-LR SFP+ SMF Transceiver 1310nm, 10km, LC, DMI.
LU 90 01118
Luminex 10GBase-TX SFP+ Copper Transceiver 30m, RJ45, Fast loss.
LU 90 00871
GigaCore 1.25Gd Multi-Mode Fiber Transceiver.
LU 90 00872
GigaCore 1.25Gd Single-Mode Fiber Transceiver.
LU 90 00874
GigaCore 1.25Gd Copper RJ45 Transceiver.
This list is not exhaustive, please visit
https://www.luminex.be/products/accessories
for the latest offerings
in SFP+ modules.
2 | InstallatIon
18
