manualshive.com logo in svg

Luminex Amnis FlowSight, User Manual

The Luminex Amnis FlowSight, renowned for its cutting-edge flow cytometry capabilities, comes with a comprehensive User Manual to harness its full potential. Easily downloadable for free at manualshive.com, this manual provides step-by-step instructions and in-depth insights, ensuring users make the most of this powerful instrument effortlessly.

Share
Download
background image

8.    Optional: If desired, compensation values can be adjusted by clicking on the compensation tool button in the graph.

9.    For example changing the matrix value in the 2x2 submatrix from 0.189 to 0.10 changes the compensation as 

shown from the graph above (properly compensated) to the graph below (under compensated).

10.   Repeat  Load Compensation Sample step for each single-color compensation sample in the experiment.

For Research Use Only. Not for use in diagnostic procedures.

25

Amnis

®

FlowSight

®

Imaging Flow Cytometer User Manual

Summary of Contents for Amnis FlowSight























































Reviews:

No comments

Related manuals for Amnis FlowSight

GE Mentor Visual iQ Quick Start Manual preview
Mentor Visual iQ
Brand: GE Pages: 2
Badger Meter Blancett B3100 Series User Manual preview
Blancett B3100 Series
Brand: Badger Meter Pages: 16
Badger Meter ModMAG M1000 User Manual preview
ModMAG M1000
Brand: Badger Meter Pages: 26
Badger Meter ModMAG M2000 Installation And Operation Manual preview
ModMAG M2000
Brand: Badger Meter Pages: 48
F&F LE-03 Quick Start Manual preview
LE-03
Brand: F&F Pages: 2
DAKOTA ULTRASONICS MX-5 Operation Manual preview
MX-5
Brand: DAKOTA ULTRASONICS Pages: 48
TE Connectivity 832 Operating Manual preview
832
Brand: TE Connectivity Pages: 9
Hanna Instruments HI 758 Instruction Manual preview
HI 758
Brand: Hanna Instruments Pages: 2
Hanna Instruments HI 720 Manual preview
HI 720
Brand: Hanna Instruments Pages: 2
Hammond SKX Instructions Manual preview
SKX
Brand: Hammond Pages: 16
KROHNE AF-E 400 Quick Start Manual preview
AF-E 400
Brand: KROHNE Pages: 34
PAT DS 350 Troubleshooting Manual preview
DS 350
Brand: PAT Pages: 57
Gates 507C Manual preview
507C
Brand: Gates Pages: 112
ICP DAS USA PM-3133-MTCP User Manual preview
PM-3133-MTCP
Brand: ICP DAS USA Pages: 71
CONDTROL xMarker User Manual preview
xMarker
Brand: CONDTROL Pages: 11
Milwaukee 2206-20 Repair Service Instructions preview
2206-20
Brand: Milwaukee Pages: 17
GRAVITY TRAVELER 3D ARM Quick Start Manual preview
TRAVELER 3D ARM
Brand: GRAVITY Pages: 2
K&K Sound VIOLINISSIMO Product Manual preview
VIOLINISSIMO
Brand: K&K Sound Pages: 2

Brands by name

Popular brands

Load more brands