70
Configuration or Director
without connecting the
VS-LC101/VS-LC102 to
my PC via a router
manually adjusted to the same network segment (e.g., 192.168.0.x) before
connecting the PC network to the WAN terminal of the VC-LC101.
[Remark] 169.172.x.x is an invalid network segment, and should not be
used.
9.
The remote control or
panel keys are not
responding
The remote control and panel keys become non-functional when logging
into the system
10.
The remote control is
not responding, but the
panel keys are
The remote control uses infrared signals. Devices with a stronger infrared
signal is placed nearby (e.g., infrared digital whiteboards) may interfere
with the signal of the remote control. Please keep the
VS-LC101/VS-LC102 away from such devices.
11.
Lecture information is
not presented when
selecting a lecture in
System Configuration
The system uses the FireBreadthed VLC plugin to view lecture information.
If lecture information fails to load, this may be because this component has
not been installed. Refer to
Chapter 8
to access Director and begin
installation.
12.
Forget username and
password
Use a small screwdriver to press the
Reset Button
on the rear side of the
host for several seconds to restore the host to its factory settings
13.
When playing PPT with
the PPT-index,
VS-LC101/VS-LC102
does not automatically
add a key note
Please open a browser, log in the
administration page
, switch to
[Record
Setting]
page, and confirm if the
[Start PPT Index]
is enabled.
Confirm
[Start PPT Index]
is enabled, log out the administration page after
applying the settings, and re-execute the PPT playback and recording.
14.
After switching the FTP
server, the video is not
automatically uploaded
VS-LC101/VS-LC102 will mark videos that have been uploaded to FTP,
which will not be automatically uploaded again. To upload the video to
other FTP, you can upload files manually after FTP setup is complete. For
related instructions, please refer to
6.2.13 I want to upload files to FTP