17
Click
[Log in]
to enter the System Configuration.
5.2.4 Settings
1 Confirm Time Setting
Confirm the time setting. The time can be manually set or chosen from
other NTP servers if modifications are required.
2 Confirm hard drive status
Open the
[Local Storage Setting]
Confirm hard drive status and then configure depending on the status
Unformatted:
Click
to format the hard drive, which will take several
minutes depending on the storage device format; do not close the page
until successful operation (
Note:
Backup hard drive prior to formatting, as
it will erase the whole hard drive)
Unmounted:
Follow the instruction below to mount the hard drive
Mounted:
Skip this step to connect to a camera
Check
[Enable Local Storage]
to mount the hard drive.
Check
[Cycling Record]
to cycle hard drive space. When the hard drive
space is used up, the oldest data will be automatically overwritten by the
newest data, allowing the system to continue storing information.
Select the drive
[SATA/USB/eSATA]
and choose the desired storage
device.
Select
[SATA]
for VS-LC102 with built-in hard drive.
Select
[USB/eSATA]
for VS-LC101 connected with an external hard
drive.
Click
[Apply]
to apply the settings.
The storage device status changes to
[Mounted]
, indicating that the
storage device has been successfully set.
