38
7.2 System Configuration Operation
7.2.1 Change Host Name
Go to
[System Information]
. Change host name and description, click
[Apply]
on the bottom right to apply change.
7.2.2 Change System Time
Go to
[System Information]
. Change date and time using NTP service or
manually.
NTP:
Check
[NTP Service]
. Choose NTP server to change system time to
reflect the server time, select
Time Zone
, and check
Daylight Saving
Time
if required. Click
[Apply]
at the bottom right to apply changes.
Manually :
Check
[Manually]
. Select the correct date and enter the correct
time in the time fields. Click
[Apply]
on the bottom right to apply
changes.
7.2.3 Source
Setting
Go to
[Source Setting]
and then
[Video Source]
. Click on the
[images]
to set
name/video source/image setting/image port of the image capture input
channel.
VGA or HDMI can be selected for the image capture source, which is the host
input port VIDEO IN 1 and 2. When either VGA or HDMI is connected, the host
automatically detects and switches to the signal source.
To connect a network camera, the connection settings in the network
camera must first be set. Refer to
7.2.4 Connect IP Camera
for
instructions.
