Lumenis
®
Pulse
TM
50H / 100H Laser Systems
Connecting the Footswitch
UM-20006520DE, Rev. A
Page 35
Connecting the Footswitch
Insert the footswitch connector into the footswitch receptacle on the rear
of the laser system console. Align the red dot on the footswitch connector
on top, then press it in.
Figure 4: Connecting the Dual-Pedal Footswitch
NOTE:
If the footswitch is not properly connected when the laser system is turned
on, the message
Attach Footswitch
appears in the notification bar until
the footswitch is properly connected.
