Lumenis
®
Pulse
TM
50H / 100H Laser Systems
Treatment Screen Description
UM-20006520DE, Rev. A
Page 45
Figure 9: Treatment Beam Delivery via Right or Left Pedals
6. Notification bar
- errors and notifications appear in the notification
bar at the bottom of the screen, to alert you of a necessary action or a
laser malfunction. Refer to
Handling Error Messages and
Notifications
for a list of advisory indications, their probable causes,
and solutions.
7. Total Energy
– The Total Energy display shows the total holmium
energy, in kilojoules, delivered since the last reset. The display
automatically resets to zero the first time you press
Ready
after
turning on the laser system, to allow reading of the total Energy of last
treatment. To manually reset the display, press the
Clear kJ
selector.
8. Standby/Ready
mode selection –
Standby/Ready
buttons determine
whether pressing the footswitch will activate the laser system (
Ready
mode) or not (
Standby
mode).
WARNING:
Except during actual treatment, the laser system must always be in
Standby
mode. Maintaining the laser system in
Standby
mode prevents
accidental laser exposure if the footswitch is inadvertently pressed.
9. Clear kJ
– clears the calculated total energy from the control panel;
should always be cleared at the beginning of a new procedure.
Fault XXX
Clear kJ
5
3
1
8
9
7
6
2
4
4
