Lumenis
®
Pulse
TM
50H / 100H Laser Systems
Intra-Operative Instructions
UM-20006520DE, Rev. A
Page 48
5.
Press the
Ready
button to switch to
Ready
mode.
WARNING:
Always check your parameter settings on the screen before setting the
system to
Ready
mode.
6.
Verify that your foot is on the appropriate footswitch pedal for the left-
side or right-side parameter settings on the screen.
7.
Press the footswitch that corresponds to the desired set of parameters
to deliver the treatment beam.
As the laser delivers the treatment beam, the highlighted yellow
margin appears around the appropriate footswitch settings area on the
control screen and an audible signal sounds to alert you that laser
energy is being emitted. The audible signal is different for the right
and left pedals.
8.
Press the
Ready
and
Standby
buttons on the screen or use the
footpedal
Ready/Standby
button (on the top of the footswitch) to
toggle between
Ready
and
Standby
modes.
9.
If surgery is interrupted, set the laser system to
Standby
mode to
disable the footswitch.
WARNING:
Always set the laser system to
Standby
mode when it is not in use to
avoid unintended laser emission.