DP16-910B-VS 03
GENERAL POWER TOOL SAFETY WARNINGS
c) When Battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal object
that can make a connection from one terminal
to another.
Shorting the battery terminals
together may cause burns or a fire.
D) User abusive conditions, liquid may be
ejected from the battery; Avoid contact. If
contact accidentally occurs, flush with copious
amounts of water. If liquid contacts eyes, seek
medical help immediately.
Liquid ejected from
the batter may cause irritation or burns.
7. Additional Safety and working
Instructions
7.1. Dust from materials such as lead-containing
coatings, some wood types, minerals and
metals can be harmful to one’s health and
cause allergic reactions, leading to respiratory
infections and/or cancer.
Materials containing
asbestos may only be worked by specialists.
Observe the relevant regulations in your country
for the materials to be worked.
7.2. Prevent dust accumulation at the
workplace.
Dust can easily ignite.
8 Additional Safety Warning for Bench
Drills
8.1 Always wear hairnet for long hair, and
make sure you are wearing safety goggles.
8.2 Do not wear gloves, ties or loose clothing.
8.3 while drilling make sure the piece is
secured with a vice; never hold the workpiece
by hand! Never keep your fingers near where
they could touch the drill in case the piece
moves suddenly.
8.4Do not use the machine until it has been
properly installed in accordance with the
instructions provided.
8.5Do not switch on the machine until all pieces
have been firmly tightened together.
8.6Do not use the machine if it is damaged or
functioning badly.
8.7 Perform all adjustments before switching
on the machine, make sure to set table height
or depth stop to prevent the drill entering the
table.
8.8(If Applicable) Always make sure chick key is
removed before use.
8.9Before switching on the machine check the
chuck has been mounted correctly and
securely, and that the safety guard is engaged.
8.10In operations stick to recommended
speeds for the drilling accessories and material
being used.
8.11 Switch off the power before handling the
drill or chuck. Once finished remove drill and
clean the table before leaving the machine.
8.12 Always lock the on/off switch when
leaving the machine.
9. Safety Warnings for Lasers
The bench drills has a built-in laser light. The laser
is CLASS 2. These lasers do not normally present
an optical hazard. However, DO NOT stare at the
beam, as this can cause flash blindness.
a) Do not remove or deface any product labels.
Removing product labels increases the risk of
exposure to laser radiation.
Summary of Contents for DP16-910B-VS
Page 23: ...DP16 910B VS 21 Parts Diagram...
