2
Luma 300 Series Wi-Fi Cube IP Camera
Read this page
before
you go to the job site!
For maximum control and convenience,
install your camera with a connection to the Internet
via your NVR
or through a local network router.
This allows you to use OvrC,
a powerful remote maintenance tool. See
OvrC.com for details. In addition, your client can use the Luma Surveillance mobile app to check on the camera
from anywhere.
For installation using this guide, you must be able to access this camera through a personal computer.
If your
surveillance system is not on a network, you’ll have to use the NVR’s local interface for installation. See the NVR
user’s manual for details.
Required Equipment
}
A network connection (and an NVR, if desired)
}
Admin rights to a computer that can access the network
}
Mobile phone with the Luma Surveillance mobile app (recommended) or CCTV tester
}
Power source: either PoE or standard wall outlet
}
Phillips screwdriver
Additional Resources
If desired, you can add an SD card (up to 128 GB) to the camera. An SD card or a network drive is required if you
want to keep a log of the camera’s activities.
You can acquire a PDF of the web interface manual and other materials from the product page at SnapAV.com.
