18
Luma 300 Series Wi-Fi Cube IP Camera
Calibrate the Camera’s Clock
Click on
System Settings > Time Settings.
At the top, choose your time zone. By default, the system uses network time protocol (NTP) to synchronize your
system to Coordinated Universal Time.
We strongly recommend using NTP to keep your system well calibrated.
If you want to use manual time sync, or if your system is isolated from the Internet, see the camera web interface
manual (available online).
If you are in a location that does not observe daylight saving time, click the
Enable DST
checkbox to deselect it.
Click
Save
to confirm changes.
