LUCHT LHZ TECHNOTHERM SPH 1000 DSM Installation And Operating Instructions Manual Download Page 41

Page: 41 / 44

Installa� on and Opera� ng Instruc� ons

VPS / VPS-Design / SPH / VPN

Feel good through warmth from electricity - www.technotherm.de

10. Installa� on of Electricity

The device was developed for an electrical voltage of 230 V(nominal) and an alterna� ng current of (AC)

50 Hz. The electrical installa� on may only be performed according to the user manual and only by a

qualiﬁ ed Electrician. The device was designed to be used with termina� on and the connec� on cable

has to be plugged into an appropriate socket at all � mes. (No� ce Permanent cables may not be used)

The distance between the receptacle and the device hast to be at least 10cm. The connec� on line may

not touch the device at any � me.

Summary of Contents for TECHNOTHERM SPH 1000 DSM













































Search results

Summary of Contents for TECHNOTHERM SPH 1000 DSM

Reviews:

Related manuals for TECHNOTHERM SPH 1000 DSM

Brands by name

Popular brands

LUCHT LHZ TECHNOTHERM SPH 1000 DSM, Installation And Operating Instructions Manual

Search results

Summary of Contents for TECHNOTHERM SPH 1000 DSM

Reviews:

Related manuals for TECHNOTHERM SPH 1000 DSM

Brands by name

Popular brands