Installa� on and Opera� ng Instruc� ons
VPS / VPS-Design / SPH / VPN
Feel good through warmth from electricity - www.technotherm.de
GB
16
Put a thermometer in the room at the same distance from the
floor like the thermostat. Check the real temperature in the room
after 1 hour.
Enter this value in the calibration parameter menu by using the
or
keys in order to enter the real value.
Press
to validate the calibration.
AF – Antifreeze set point temperature
Pressing
or key permits to configure set point temperature
value for antifreeze mode. Pressing validate the setting.
ITCS – Intelligent Temperature Control System
This function is described in the chapter “Special functions”. This
parameter permits to activate or not this functionality.
Automatic open window detection
This function is described in the chapter “Special functions”. This
parameter permits to activate or not this functionality.
Heater power
This parameter corresponds to the heater power. This parameter
has to configure in order to calculate power consumption.
Child protection
This parameter permits to reduce the power of the heater in order
to pretect child if they touch the product. If this parameter is equal
to 100%, this function is desactivated.
Easy program
If this parameter is “no”, only 2 modes are available and
thermostat can’t apply a program. If it is “yes”, all mode of the
thermostat are available (see chapter
“Menu for mode selection”
).
CLr – clear product memory with factory settings
This function permits to reload factory settings of the thermostat:
temperature setpoint, user program and all setpoint temperatures.
