Installa� on and Opera� ng Instruc� ons
VPS / VPS-Design / SPH / VPN
Feel good through warmth from electricity - www.technotherm.de
GB
6
key, the set point value is
validated. The small hand
logo
will be displayed when override
function is active. This override will
continue until the next step
(program switch to another
temperature setpoint) or during
24H maximum.
By pressing key, navigation menu
is displayed.
d.
Anti-freeze mode
This mode permits to protect your installation against
freezing.
The anti-freeze setting temperature is fixed. However,
it can be adjusted in the parameter menu ‘AF’ (see
chapter 6).The default value is equal to 5°C.
From the screensaver (lighted backlight),
,
and
keys permit to switch displaying between measured
temperature and setting temperature.
By pressing key, navigation menu is displayed.
e.
Mode OFF
In standby mode, only OFF
mode logo is displayed.
After pressing one of 4 keys (
or or or ),
measured temperature is
displayed. Another pressing
permits to display the time.
After few seconds, these
informations aren’t
displayed.
If the touch
is pressing,
thermostat will wake up in
the last selected mode.