Installa� on and Opera� ng Instruc� ons
VPS / VPS-Design / SPH / VPN
Feel good through warmth from electricity - www.technotherm.de
GB
Feel good through warmth from electricity - www.technotherm.de
Feel good through warmth from electricity - www.technotherm.de
|21
Technotherm Smart Control Manual
Overview
The next confi gura� on op� ons will appear:
•
C1: Temperature unit adjustment ºF/ ºC
•
C2: Hea� ng control type adjustment (PID –TRIAC radiators-, PID15min or PID30min- Re
lay radiators-, hysteresis 0.25ºC, 0.35ºC, 0.5ºC or 0.75ºC
•
C3: Temperature measurement compensa� on
•
C4: Firmware version
•
C5:Open window detec� on ac� va� on (the hea� ng stops for 30 min if there is a fall of
2,4ºC or higher within 4 min), indicated with the symbol.
•
C6: Adaptable heat an� cipa� on. The radiator predicts the right moment to start hea� ng
in order to reach the desired temperature according to the programmed schedule, so the
user does not need to take into account the � me needed to heat the room. Maximum
an� cipa� on � me: 24h.
•
C7:Select “Full” for Full mode (Auto/Man/OFF) or “Man” for Simple modes (Man/OFF)
Feel good through warmth from electricity - www.technotherm.de
Feel good through warmth from electricity - www.technotherm.de
|23
Technotherm Smart Control Manual
12 Specifi ca� ons
Heater
•
LCD display with backlight
•
4 bu� ons
•
RF 868Mhz
•
1 PCB for control
•
3 Temperature zones
Comfort
Economic
Frost protec� on
•
Temperature measurement resolu� on:
0.1ºC
•
Set temperature in steps of:
0.5ºC
•
Measurable temperature range:
0-45ºC
•
Temperature se� ng :
5-35ºC
•
Time programs in steps of:
1h
•
PCB work temperature:
<80ºC
•
External temperature sensor
•
Electrical self-consump� on measurement: <3%
•
Transformerless power stage
•
Max . power: 3500W (16A) for relay
Smart Box
•
Volt. External supply :
5V 500mA
•
Consump� on:
300mA
•
Connector RJ45 for ethernet connec� on
•
LED status indicators
•
868Mhz RF, integral PCB antenna
•
Micro USB Adaptor included
•
Ethernet 0,5m cable included
13 Reset
At the heater:
At the smartbox:
20S .
Reset the device
Start screen
press
OK
and
PROG
10 sec.
