Installa� on and Opera� ng Instruc� ons
VPS / VPS-Design / SPH / VPN
Feel good through warmth from electricity - www.technotherm.de
GB
Digital control display
TDI
–
“
plus
”
Thermostat
Mounting
Mounted on the side of the radiator using
screws.
Connection
Connection on the radiator’s power card.
Adjustment
buttons
part to connect to
the power card
réf : 7709936
On / Off
/
mode
Configuration
Menu 3: Backlight time out setting
The time out can be adjusted between 0
and 225 seconds, in steps of 15 seconds
(set on 90 seconds by default).
To modify, press on the + or - buttons then
press OK to confirm and go to the next setting.
When in Off mode,
press and hold down the On/Off button
for 10 seconds to access the first configuration
menu.
>10 sec.
Menu 4: AUTO mode temperature display option
Menu 1:
ECO set-point adjustment
By default, Economy setting = Comfort setting - 3.5°C.
0 = Continuous display of room temperature.
1 = Continuous display of set-point temperature.
To modify, press on the + or - buttons then
press OK to confirm and go to the next setting.
Menu number
Menu 5: Product number
This menu allows you to view the product
number.
This reduction can be set between
0 to -10°C, in steps of 0.5°C.
To adjust the reduction, press on
the
+
or - buttons then press OK to confirm
and go to the next setting.
To allow the user to modify the set-point, press
on the + button in Economy mode until “----” is
displayed on the screen.
To exit the configuration mode, press OK.
Menu 2: Correction of the measured
temperature
If there is a difference between the temperature noted
with an
external
thermometer and the temperature measured and
displayed by the unit, menu 2 acts on the measurement of the
probe so as to compensate for this difference (from -5°C to +5°
C in steps of 0.1°C).
To modify, press on the + or - buttons then press
OK to confirm and go to the next setting.
4. Details for opera� on of „plus“ Thermostat
