Lucent Technologies PARTNER Voice Messaging PC Card Release 2 Installation And Programming Download Page 10

Page: 10 / 67

Issue 1 August 1998

About This Document

This guide provides instructions for installing, programming, and using the
PARTNER

Voice Messaging PC Card Release 2.0 with the PARTNER Advanced

Communications System (ACS) Release 1.1 or later and PARTNER Endeavor
System Release 1.0. This guide is intended for:

■

The technician who installs the hardware and programs the initial system
settings.

■

The System Manager—the person who is responsible for managing the
system on an ongoing basis.

Terminology

This guide uses the following terms:

■

Communications system (CS):

Release 1.1 or later of the PARTNER

Advanced Communications System or Release 1.0 of the PARTNER
Endeavor System.

■

System phones:

the telephones specifically designed to work with the

communications system, including the PARTNER Endeavor 34D,
PARTNER Endeavor 18D, PARTNER Endeavor 18, PARTNER-34D,
PARTNER-18D, PARTNER-18, PARTNER-6, MLS-34D

, MLS-18D

MLS-12D

, MLS-12

, MLS-6

, MLC-6, MDC 9000, MDW 9000, MDW 9010,

and MDW 9030P.

Summary of Contents for PARTNER Voice Messaging PC Card Release 2




































































Search results

Summary of Contents for PARTNER Voice Messaging PC Card Release 2

Reviews:

Brands by name

Popular brands

Lucent Technologies PARTNER Voice Messaging PC Card Release 2, Installation And Programming

Search results

Summary of Contents for PARTNER Voice Messaging PC Card Release 2

Reviews:

Brands by name

Popular brands