Chapter 4 Configuring the Basic System
Using the Equipment Configuration Window
4-32
255-700-019
PacketStar
™
PSAX 20 Access Concentrator User Guide
, Issue 1
Release 6.3.0
End
Deleting an In-Band Management SVC Route
Deleting an In-Band
Management SVC
Route
Perform the steps in the following procedure to delete an In-Band SVC route.
Begin
Deleting an In-Band SVC Route
1
In the Inband Management Route Configuration window (see
Figure 4-18 on page 4-28), select the
Delete a route
command and
press Enter.
2
Select the
Go Back to Route Table
command to check that the Inband
Management Route Table (see Figure 4-19 on page 4-29) does not
contain the route you just deleted.
End
Using the Equipment Configuration Window
To configure the Stratum 3–4 module or any I/O module, you select an item
from the Equipment Configuration window.
From the Console Interface Main Menu window, select the
Equipment
Configuration
option.
Packets Trans-
mitted
Displays the number of packets trans-
mitted.
Packet Transmit
Errors
Displays the number of packet transmit
errors.
Table 4-8. Field Values for the In-Band Management Statistics
Field Name
Description
Summary of Contents for PacketStar PSAX 20
Page 399: ......