Chapter 4 Configuring the Basic System
Configuring the System for Your Site
4-16
255-700-019
PacketStar
™
PSAX 20 Access Concentrator User Guide
, Issue 1
Release 6.3.0
5
Select the
Apply Site-Specific Configuration
command, and either
press Enter to save these values now, or wait until you have entered
data in all the fields on this window.
Note:
The local time is automatically calculated and displayed in the
[Local Time]
field after you apply the values. The local time is
calculated based on the values in the
Hour:Min:Sec
field and the
selected value in the
Time From UTC
field.
End
Table 4-3. Field Values for the System Date and Time Panel
Field
Description
Mon/Day/Yr
Enter the current date in the format
shown here:
mm/dd/yyyy
(2-digit values
for the month and the day, and a 4-digit
value for the year).
Displays the current date in month (
mm
),
day (
dd
), and year (
yyyy
).
Hour: Min:Sec UTC
Enter the current time in Universal Time
Coordinated (UTC) format, also known as
Greenwich Mean Time (GMT).
Time from UTC
Sets local time display by adding or sub-
tracting hours and minutes from the
UTC.
Note:
Both negative and positive
hourly time selections are
available. The time selected
represents the difference
between your local time and
the UTC.
Note:
Select
00
for all countries
except those whose time
zones operate at intervals 30
minutes ahead (and behind)
all others. For these locations,
select
30
.
Press Enter to cycle through the pre-
defined set of values and select a value,
according to your local time custom.
[Local Time]
(display only)
Displays local time of the PSAX system.
Note:
Summary of Contents for PacketStar PSAX 20
Page 399: ......
