Chapter 4 Configuring the Basic System
PNNI System-Wide Configuration
4-68
255-700-019
PacketStar
™
PSAX 20 Access Concentrator User Guide
, Issue 1
Release 6.3.0
Viewing the PNNI Neighbor Peer Table
The PNNI Neighbor Peer table contains all the attributes necessary to describe
the relationship a node in the PSAX system has with a neighboring node
within the same peer group.
The PNNI Neighbor Peer table is read-only because neighboring peers are
discovered dynamically by the PNNI protocol, not manually configured.
For more information, see the ATM Forum Specification,
Private Network-
Network Interface (PNNI 1.0) Specification Version 1.0, af-pnni-0055.000,
Sections
5.7 and 5.8.
To view PNNI neighbor peers, perform the steps in the following procedure.
Begin
Viewing PNNI Neighbor Peers
1
On the Console Interface Main Menu, select the
Site-Specific
Configuration
option, and press Enter.
The Site-Specific Menu is displayed.
2
Select the
PNNI System-Wide Configuration
option, and press Enter.
The PNNI System-Wide Configuration window is displayed (see
Figure 4-25).
3
Select the
PNNI Neighbor Peer Information
command.
The PNNI Neighbor Peer Table window is displayed (see Figure 4-38).
Figure 4-38. PNNI Neighbor Peer Table
Summary of Contents for PacketStar PSAX 20
Page 399: ......
