Appendix C Configuring In-Band Management
Using the Hybrid Connection Configuration
C-12
255-700-019
PacketStar
™
PSAX 20 Access Concentrator User Guide
, Issue 1
Release 6.3.0
4
For all the PSAX systems except the main router PSAX system, the
Ethernet interface IP network should be different from the SUN
machine’s Ethernet interface IP network.
5
All of the NMS stations should be in the one IP network, but can be in
different subnets connected to the main router PSAX system via
Ethernet or OC3-ATM connections.
6
All the end system and router PSAX system in-band interface IP
addresses may or may not be in the same IP network. For each different
IP network, a route should be configured on each of the NMS station
(SUN machine) to use the main router PSAX system as gateway to that
network. (The metric should be set to 2).
7
The default gateway can be configured on the remote PSAX system to
use the main router PSAX system as a gateway.
8
The main router PSAX system should be configured with in-band
connections to each of the remote PSAX systems.
9
The remote PSAX system should have only one connection to the NMS
station’s network and the appropriate mask if the main router PSAX
system is not used as default gateway by the remote PSAX system.
10
If the main router PSAX system is used as a default gateway by the
remote PSAX system, then the remote PSAX system should have only
one in-band connection to the main router PSAX system, the in-band IP
address.
End
Setting PVC
Connections for
Hybrid Connection
Configuration
Assume that the VPI: VCI for connection between node A and B is VPIab:
VCIab and so on. Also assume that the Ethernet IP address of all nodes,
except node A, do not lie in the NMS stations’ network address range.
Steps to Setting PVC Connections for Hybrid Connection
Begin
Configuration
Either work from the console or the
AQueView
screen.
AQueview
directions
are in the
AQueView
guide.
Perform the steps in the following procedure to set PVC connections for
hybrid connection.
1
Configure the primary IP address for in-band management on the CPU
module of the main router PSAX system (Node A) using the console
interface:
Use
[Site Specific Configuration]->[ In-Band Management]
menu.
Example:
Primary IP Address: 020.001.001.001
Primary IP Mask: 255.000.000.000
Summary of Contents for PacketStar PSAX 20
Page 399: ......
