Lucent Technologies PacketStar PSAX 20, User Manual

Page: 212 / 400

Chapter 5 Using System Diagnostics
Running Cell Test Diagnostics
5-8 255-700-019
PacketStar
™
PSAX 20 Access Concentrator User Guide , Issue 1 Release 6.3.0
Field Descriptions 5 Select the values for the fields on this window from the values given in
Table 5-3.
• Continuous Update Continuously updates the information in
the
[Packets Transmitted, Received, and Mis-
matched] fields every two seconds. Select
this command and press Enter to turn the
continuous updating on and off as needed
(similar to a toggle switch).
• Reset Cell Counters Sets the values in the
[Packets Transmitted,
Received, and Mismatched]
fields to zero.
• Send Payload Once Sends the payload one time.
• Send Payload Continu-
ously
Sends the payload continuously 10 times
per second.
• Delete Connection
(displayed only after
you have sent a pay-
load one time)
Deletes the connection you set up on the
Cell Test Diagnostics window. Use this
command after you have sent a test pay-
load by using the
Send Payload Once com-
mand.
• Stop Cell Test
(displayed only after
you have sent a pay-
load continuously)
Stops a continuously running test and
deletes the connection you set up on the
Cell Diagnostics window. Use this com-
mand after you have sent a test payload
by using the
Send Payload Continuously
command.
• Go Back to Cell Test
Diagnostics
→
Redisplays the Cell Test Diagnostics win-
dow.
Command Function
Table 5-3. Field Values for the Cell Test Payload Window
Field Names Values Description
[Received Pay-
load]
(display only) Dependent on the
your input in the
Transmitted Pay-
load field The packets received.
Transmitted
Payload Any digits The values you enter in this field are
transmitted by the system
[Protocol]
(display only)
Atm Indicates the type of protocol in use.
[Test Status]
(display only)
Running,
Not-running Indicates whether or not the cell test
payload is currently being transmitted
or received or both.