255-700-019
4-55
PacketStar
™
PSAX 20 Access Concentrator User Guide
, Issue 1
Release 6.3.0
Chapter 4 Configuring the Basic System
PNNI System-Wide Configuration
4
Select the
Create Metrics Entry
command.
This entry is added to the PNNI Metrics Table window.
5
If you are making changes to an existing metric configuration, select the
Apply Configuration
command.
6
Type
C tr l+ G
to return to the Console Interface Main Menu window and
save the configuration.
End
Configuring Summary Addresses
To configure PNNI summary addresses, perform the steps in the following
procedure.
Begin
Summary Address Configuration
1
On the Console Interface Main Menu, select the
Site-Specific
Configuration
option, and press Enter.
Cell Delay Vari-
ation
0xFFFFFFFF
(default)
Variation in the cell transit delay, in
hexadecimal notation.
Cell Loss Ratio
(0)
0xFFFFFFFF
(default)
Cells lost/number of cells sent for the
peak cell rate 0 category, in hexadeci-
mal notation.
Cell Loss Ratio
(0+1)
0xFFFFFFFF
(default)
Cells lost/number of cells sent for the
peak cell rate 0+1 category, in hexadeci-
mal notation.
Cell Rate
Margin
0xFFFFFFFF
(default)
Difference between the effective band-
width allocation and the allocation for
sustainable cell rate ( the safety margin
above the sustainable cell rate), in
hexadecimal notation.
Variance Factor 0xFFFFFFFF
(default)
Relative measure of the square root of
cell rate margin, normalized by the
variance of some of the cell rates of all
existing connections, in hexadecimal
notation.
Gcac CLP
ClpEqual0
(default);
ClpEqual0or1
Cell loss priority for generic connection
admission control (GCAC).
Table 4-15. Field Values for the PNNI Metrics Configuration Window
Field Name
Values
Description
Summary of Contents for PacketStar PSAX 20
Page 399: ......
