Beta Draft Confidential
Installing HP OpenView 6.2
Script File Installation Method
B-STDX, CBX, and GX Network Management Station Installation Guide
7/12/04
5-7
5.
At the HP OpenView Installation Menu, enter
1
to install HP OpenView 6.2.
The following message appears:
Would you like to view (tail -f) the install log (default=y)?
The Tail window allows users to view the installation log.
6.
Press Return.
The following message appears:
What display should the install log xterm go to
(default:0.0)?
7.
Press Return or enter
<
local hostname
>:0.0
.
The following message appears:
Note: In order to restore back to the original state of your
HP OpenView installation, it is recommended that you back
your system up before continuing with this procedure.
Complete all prerequisites before continuing.
Do you wish to continue? <y|n> [default=y]:
8.
Press Return to continue.
The script creates the Sybase and NMS user accounts. The script does this to
provide user accounts on the HP Server if you install a two-system configuration
(Sybase on one system, HP OpenView and NavisCore on another). If you are
installing a single-system configuration, the user accounts have already been
created by the Sybase installation script.
The following messages assume a single-system configuration:
Creating Group Account for ‘dba’
---------------------------------
The group, ‘dba’, already exists.
Creating a user account for sybase
---------------------------------------
The user, sybase, already exists.
Enter the Sybase environment path [default : /opt/sybase] ?
Note –
In a new Xterm window on the local system, run “
xhost +
” as the user who
controls the system console. Executing this command enables you to display the
installation log on the local system.
Summary of Contents for B-STDX
Page 170: ......