Beta Draft Confidential
5-4
B-STDX, CBX, and GX Network Management Station Installation Guide
Installing HP OpenView 6.2
Script File Installation Method
6.
At the HP OpenView Installation Menu, set up the system by entering
1
.
The following message appears:
Would you like to view (tail -f) the install log (default=y)?
The Tail window allows users to view a log of the installation process.
7.
Press Return.
The following message appears:
What display should the install log xterm go to
(default:0.0)?
8.
Press Return or enter
<
local hostname
>:0.0
.
The Tail Window appears and the following message appears in the Xterm
window:
Note: In order to restore back to the original state of your
HP OpenView installation, it is recommended that you back
your system up before continuing with this procedure.
Complete all prerequisites before continuing.
Do you wish to continue? <y|n> [default=y]:
9.
Press Return to continue.
The following message appears:
Modifications have been made to ‘/etc/system’. For the
changes to take effect, you must REBOOT the workstation now.
Then re-run the scripts after the system resumes.
#
10.
At the
#
prompt, enter
init 6
to reboot the system.
When the system reboots, the Sybase Server automatically shuts down and
restarts. If you installed a two-system configuration, the Sybase Server does not
shut down because Sybase now resides on another system.
11.
Proceed to
“Installing HP OpenView 6.2”
.
Note –
When you select option
1
the first time, the script modifies the
/etc/system
file. These modifications take effect once you reboot the system. However, when you
select option
1
again, the script installs HP OpenView 6.2.
Note –
In a new Xterm window on the local system, run “
xhost +
” as the user who
controls the system console. Executing this command enables you to display the
installation log on the local system.
Summary of Contents for B-STDX
Page 170: ......