Beta Draft Confidential
Sybase Prerequisite Tasks
Setting Up the System
B-STDX, CBX, and GX Network Management Station Installation Guide
7/12/04
3-21
5.
Enter
<
Cascade device pathname
>
.
For example,
/dev/rdsk/c0t1d0s5
The following message appears:
Setting device permissions. Please Wait..
Device /dev/rdsk/c0t1d0s5 has been set.
Enter the Log Device Path Name (e.g. /dev/rdsk/c0t1d0s6):
6.
Enter
<
log device pathname
>
.
For example,
/dev/rdsk/c0t1d0s6
The following message appears:
Setting device permissions. Please wait..
Device /dev/rdsk/c0t1d0s6 has been set.
The maximum value for your Master Device has been calculated
to maximize the size of your raw partition. By accepting the
default you will be utilizing the whole raw device. A minimum
value has been established at 200 Mbytes. You will not be
allowed to go below that threshold.
NOTE: It is recommended that you accept the maximum value.
Otherwise, the space left over will be wasted.
Enter size of your Master Device in Megabytes:
7.
Press Return to accept the default of 201.
The following message appears:
Press Enter to return...
8.
Press Return.
The following message appears:
******************************************************
If you have completed the initial SYBASE setup
successfully, please REBOOT the workstation now.
9.
At the
#
prompt, reboot the system by entering:
init 6
The Sybase prerequisite tasks are complete.
10.
Proceed to
Chapter 4, “Installing Sybase 12.5.0.1.”
Summary of Contents for B-STDX
Page 170: ......