
Beta Draft Confidential
Installing Solaris 8
Solaris 8 Installation
B-STDX, CBX, and GX Network Management Station Installation Guide
7/12/04
2-3
9. Traditional Chinese
Please make a choice (0-9), or press h or ? for help.
3.
Enter
<
number that corresponds to the language in which to
display installation prompts and messages
>
.
(For example,
<
0
>
for English.)
A menu of locales is displayed.
4.
Enter
<
number that corresponds to the locale you want to use
for the installation
>
.
(For example,
<
0
>
for English (C - 7-bit ascii).)
The OpenWindows
™
desktop starts. An empty desktop and the Solaris Install
Console window is displayed with the message:
The system is coming up. Please wait.
The Solaris Installation Program dialog box is displayed.
5.
At the Solaris Installation Program dialog box, choose Continue.
6.
At the Identify This System dialog box, choose Continue.
7.
At the Network Connectivity dialog box, select Yes and choose Continue.
8.
At the DHCP dialog box, select No and choose Continue.
9.
A Primary Network Interface dialog box is displayed if your network has more
than one network interface. At the Primary Network Interface dialog box, select
the primary network interface and choose Continue.
(For example,
<hme0>
.)
10.
At the Host Name dialog box, enter
<
your host name
>
and choose Continue.
(For example,
<nms01>
.)
11.
At the IP Address dialog box, enter
<
your IP address
>
and choose Continue.
(For example,
<152.148.56.131>
.)
12.
At the Subnets dialog box, select Yes to make this system part of a subnet. Choose
Continue.
13.
At the Netmask dialog box, enter
<
your netmask
>
(or leave the default
netmask) and choose Continue.
(For example,
<255.255.248.0>
.)
14.
At the IPv6 dialog box, select No and choose Continue.
15.
At Confirm Information dialog box, review the displayed information. If it is
correct, choose Continue. To change any information, choose Change.
Note –
Depending on your configuration, you may not be prompted for Subnet and
Netmask information (
step 12
and
step 13
) until after
step 19
.
Summary of Contents for B-STDX
Page 170: ......