Spare part list
Floor watering system
Copyright © 2018 Lubing System - All rights reserved
6
1. INTRODUCTION
1.1 Short description LUBING Pad-climate-system
The LUBING Pad-climate-system is a cooling and humidifying system for agricultural buildings for animal breeding
and for industrial complexes.
The system essentially comprises a pump that pumps water into a spraying pipe. Water is sprinkled against a
deflector at certain distances. This leads to optimal water distribution across the pads. The water flows through
the pads in cascades, with part of the water evaporating. The excess water collects in the water trough and is
recirculated by a pump. A float valve keeps the water level even.
1.2 Preface for the manual
This manual facilitates use of the Pad-climate-system and indicates the intended use of the system. The manual
contains important notes for safe, proper and economic operation of the system. Your attention will help avoid
dangers and reduce repair costs and downtimes while increasing reliability and the service life of the system. The
manual should be supplemented by the applicable national provisions on accident prevention and environmental
protection. The manual is part of the pad climate system. It must be kept accessible throughout the service life of
the pad climate system and must remain with the system even if the system is sold.
The manual must be read and used by everyone who works on the system or installs the system, e.g. at:
– operation, including preparation, troubleshooting in the course of work, cleaning, care, disposal of operating
and auxiliary substances,
– maintenance (servicing, inspection, repair) and/or
– deactivation.
The manual is part of the pad climate system. It must be kept accessible throughout the service life of the pad
climate system and must remain with the system even if the system is sold.
In addition to the manual, the statutory provisions on accident prevention in the country of use and at the location
of use, as well as the accepted technical provisions for safety and professional processing shall apply.
2. GENERAL INFORMATION
2.1 Warnings and symbols
The present instructions use the following symbols:
DANGER!
Warning of electrical hazard!
Warns of dangerous electrical current.
DANGER!
Warns of cold.
DANGER!
Warns of corrosive substances.
DANGER!
Warns of general danger.
DANGER!
Warns of flammable substances.
WARNING
Substances detrimental to health.
WARNING
This warning indicates a hazard which, unless avoided, could involve a low risk of material damage.
NOTE
Mandatory sign indicating protective gloves.
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
