Chapter 6 Remote Configuration
Acquire the upgrade software from the supplier and save it in your PC. Then click ―Browse‖
button here to find your upgrade software and then click ―Update PTZ‖ button to upgrade.
6.4 Alarm Configuration
Alarm configuration includes six submenus: Motion Detection Area, Motion Detection
Trigger, Motion Detection Schedule, Alarm Input Trigger, Alarm Input Schedule and Alarm
Out.
6.4.1 Motion Detection Area
1. Enter into ―Alarm configuration"
"Motion Detection Area" to see an interface as shown below:
2.
Move the "Sensitivity" scroll bar to setup the motion trace sensitivity.
3.
Check "Add‖, press the "Ctrl" button and move mouse to select the motion detection area;
Select ―Erase‖ and move the mouse to clear all motion detection area.
4.After you finish settings, press the "Save" button to save the settings.
6.4.2 Motion Detection Trigger
1.
Enter into ―Alarm Configuration"
"Motion Detection Trigger" to display an interface as below:
2.
Check "Enable alarm" check box to activate motion based alarm.
IP-CAMERA User Manual -
27