Notes on Safety
Please use the specified power supply to connect (supports AC24V).
Do not attempt to disassemble the camera; in order to prevent electric shock, do not remove screws
or covers.
There are no user-serviceable parts inside. Please contact the nearest service center as soon as
possible if there is any failure.
Avoid from in correct operation, shock vibration, heavy pressing which can cause damage to
product.
Do not use corrosive detergent to clean main body of the camera. If necessary, please
use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any
cleanser for high grade furniture is applicable.
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this may
damage the image sensor.
Please follow the instructions to install the camera. Do not reverse the camera, or the reversing
image will be received.
Do not operate it incase temperature, humidity and power supply are beyond the limited
stipulations.
Keep away from heat sources such as radiators, heat registers, stove., etc.
Do not expose the product to the direct airflow from an air conditioner. Otherwise, it
may cause moisture condensation inside the clear dome due to temperature difference
between internal and external of the dome camera.